Foster 7368 030 Installationshandbuch PDF herunterladen (Seite 8)

Pan detection

The pan detection ensures a perfect safety. The induction doesn’t work:

• If there is no pan on the heating zone or if this pan is not adapted to the induction. In this

case it is impossible to increase the power and the display shows [ U ]. This symbol

disappears when a pan is put on the heating zone.

• If the pan is removed from the heating zone the operation is stopped. The display shows

[ U ]. The symbol [ U ] disappears when the pan is put back to the heating zone. The

cooking continues with the power level set before removing of the pan.

After use, switch the heat element off: don’t let the pan detection [ U ] active.

Residual heat indication

After the switch off of a heating zone or the complete stop of the hob, the heating zones are still

hot and indicates [ H ] on the display.

The symbol [ H ] disappears when the heating zones may be touched without danger.

As far as the residual heat indicators are on light, don’t touch the heating zones and don’t put any

heat sensitive object on them. There are risks of burns and fire.

Booster function

The booster function [ P ] grants a boost of power to the selected heating zone.

If this function is activated the heating zones work during 10 minutes with an ultra high power.

The booster function is perfect to heat up rapidly big quantities of water, cooking of pasta’s, etc.

• Start up / Stop the booster function:

Action Control panel Display Zone

Zone selection press key [ 0 ] from the zone [ 0 ] and control light on

Start up the booster press key [ P ] [ P ]

Stop the booster slide on the “SLIDER“ [ P ] to [ 0 ]

or press on [ P ] [ 9 ]

• Power management:

The whole cooking hob is equipped by a system that automatically manages the maximum power

output. When the booster function is activated, the electronic system orders to reduce

automatically the power level of an other heating zone in order not to exceed the maximum

power available. The display of the zone where the power is reduced will blink on [ 9 ] during a

few seconds and then shows the maximum of power allowed :

Heating zone selected The other heating zone: (example: power level 9)

[ P ] is displayed [ 9 ] goes to [ 6 ] or [ 8 ] depending the type of zone

Timer

The timer is able to be used simultaneous with all heating zones and this with different time

settings (from 0 to 99 minutes) for each heating zone.

• Setting and modification of the cooking time :

Example for 16 minutes at power 7 :

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 16 17

Keine Kommentare

Foster 7368 030 Installationshandbuch Seite 8