Foster S4000.IS.4.3kW Bedienungsanleitung Seite 11
- Seite / 15
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
28
change the level, the safety mechanism will switch the hotplate off after 10
hours.
Protection against overheating
Induction cooktop is also fitted with safety device against overheating which
protects electronic parts from damages. This device operates on several levels.
When cooking zone’s temperature increases excessively, the two-stage fan
switches first. If this is not enough, extra powerful heating is deactivated, and
finally the safety device either reduces the heating power of certain cooking
zones or turns them off completely. When the hotplate cools off, the full power of
hotplate is again available. So during the operation you can hear an steady hum
due to the turning on of the cooling fan. It is possible that the cooling fan
continues to operate even after the cooktop turning off.
Switching a heater off
manually
Pressing the heater keys (+ and -) at the same time switches off the
corresponding heater and the display shows the power level as 0. We can also
switch off the heater by pressing the key (-) until the display shows the power
level as 0.
General off
The general off function can be performed regardless of the operating mode of the
cook top by pressing the on/off sensor (F).
When the cook top is turned off, a beep sounds and the displays turn off, as long
as an ‘H’ is not being shown on the corresponding display as a result of residual
heat or an alarm.
Displaying power levels
Power level 0:
A constant “0” is displayed on the heater display. If the induction generator
indicates residual heat, the display alternates between “0” and “H”. This
indication only disappears when there is no longer any danger (at 50 °C).
The display shows a “0” as long as the temperature remains below 50 °C,
whereas it shows an “H” whenever the temperature exceeds 50 °C.
To save energy, turn off the burner in advance, in order to exploit the residual
heat.
Power level 1…9, P:
If no pan is detected or if an aluminium pan is detected, the power level flashes
on the heater display. After 30 seconds, if a non-aluminium pan is not detected,
the power level returns to 0.
When a non-aluminium pan is detected, the power level is shown constant on
the heater display.
Power Management
In cases where the cooktop is already in operation for some time, to change the
limit of power, before proceeding with the planning, unplug it, then reinsert the
plug after a couple of minutes.
The power drawn is 2800 W, but you can increase it at 3500 W, 6000 W or
7200W.
Verwandte Produkte und Handbücher für Kochfelder Foster S4000.IS.4.3kW
Kochfelder Foster KE.Line.FT Bedienungsanleitung
(37 Seiten)
(37 Seiten)
Kochfelder Foster 7316 000 Bedienungsanleitung
(15 Seiten)
(15 Seiten)
Kochfelder Foster 7316-000 Bedienungsanleitung
(15 Seiten)
(15 Seiten)
Prescolite RMNICDAT manuály
Uživatelské manuály a uživatelské příručky pro Osvětlení Prescolite RMNICDAT.
Poskytujeme 1 manuály pdf Prescolite RMNICDAT ke stažení zdarma podle typů dokumentů: Uživatelský manuál
Kommentare zu diesen Handbüchern